basket  0

MASTERCARD/VISA/PAYPAL PAYMENTS ACCEPTED

Products


Railways/Trainsets

Featured...

TUNNOCKS MORRIS LD
TUNNOCKS MORRIS LDThis limited edition Tunnock's Morris LD Van is based on the...


HORNBYCLASS 390 PENDALINO
HORNBYCLASS 390 PENDALINOThis superb Hornby train, which is DCC Ready easily negotiat...


CORGI Daimler ROE, Glasgow Corporation, Priesthill
CORGI Daimler ROE, Glasgow Corporation, Priesthill | Des...


REVELLE TITANIC GIFT SET
REVELLE TITANIC GIFT SET- Easy to build due to torsional resistance of components- D...


AXIAL WRAITH RTR 4WD ROCK RACER
AXIAL WRAITH RTR 4WD ROCK RACER AXIAL WRAITH RTR 1/10TH ELECTRIC 4WD ROCK RACER ...



Articles

More Info

Subscribe

Keep up-to-date via e-mail!


HOME >> Engines and Accessories

ROTO 25V PETROL


229.99 low in stock! Sorry Presently Out of Stock

Roto Motors are manufactured by one of the leading model engine company from the Czech Republic. No expense has been spared with any of the materials and components used to produce this range of quality high performance petrol engines.
Roto Motors use a Rotary Valve Induction system to aid easy starting and smooth consistent linier performance with a slow idle speed.
One of the only petrol engine manufactures to use conventional model type engine mounting system on the 25 and 35 size engines. This allows easy installation into most aircraft.
Fully shielded electronic ignition system insures no interference with your transmitter signal.

Manufacturing Technology

Crank case The engine case is rough cast Aluminium then CNC finished to the highest tolerances finished with a strong heatproof powder coating.

Cylinder sleeve Manufactured from one piece of dural with pressed insole from the mild-granular cast iron. It is then shaped and honed to the correct size.

Piston The Pistons are cast from high quality Silicon Alloy and machined to a high tolerance.

Crankshaft The Crankshaft is hade from one piece of high grade steel machined then hardened.

All components are carefully cleaned and scanned to verify they comply with the strict tolerances Roto Motors demand.

Specification
  • DISPLACEMENT 24.9 ccm
  • BORE 34 mm
  • WEIGHT 1 100 g / 2.43lb
  • PISTON ROD 2 NEEDLE BEARING TORRINGTON
  • CRANK SHAFT 2x BALL BEARING NSK
  • IGNITION PROCESSOR CONTROLLED
  • Fuel/Oil 32:1 break in, 50:1
  • Fuel Consumption ~1.5oz/min
  • RPM RANGE 1800-9000rpm
  • PROPELLERS 2-Blade- 18x8, 18x10, 19x8
  • 3-Blade- 16x10

229.99

Sorry Presently Out of Stock